cycling4freaks.com

Hansa wrote: ↑

Mon Oct 17, 2022 8:24 pm

Hey, first of all great you started creating races

The profile looks fine for a sprinter Stage and we always need flat stages.

Some things for your drawing:

1st you can/should put your Name as designer so everyone sees who the Designer of a race was if we ride it Ingame, thats not necessary but i think its pretty nice.

2nd Only use normal letter A to Z in Race Names and City names otherwise it will come to bugs. Your City Salé at km 95 for example will cause a finance bug, so better change the name so Sale.

3rd if you import a gps file in the editor you can press the button "Recalculate Elevation" and then you should check the real elevation with the calculated elevation, it should at least kinda match.

The real elevation is the left column thats the real hight from the GPS file, the right column calc elevation is the calculated hight of the profile you created.

Recalculate elevation butten.jpg
elevation column.jpg

For your race for example the lowest point in the editor with calculated elevation is -19.4m and you have many kms that are below sealevel, in reality none of your map points goes below 0 Meters the real lowest point is -5 meters.

hight difference.jpg

If you need/want any more help feel free to ask.

Greetings Hansa

Casablanca ProTeam wrote: ↑

Mon Oct 17, 2022 9:09 pm

Hello !
Thanks for your thorough explanation and warm welcome !
I corrected all the points, for the issue with elevation, i changed km85 % from -2 to 0 and then the change applied to the other similar cases, i don't know if this is the proper way to fix this problem.

Hansa wrote: ↑

Mon Oct 17, 2022 9:21 pm

Casablanca ProTeam wrote: ↑

Mon Oct 17, 2022 9:09 pm

Hello !
Thanks for your thorough explanation and warm welcome !
I corrected all the points, for the issue with elevation, i changed km85 % from -2 to 0 and then the change applied to the other similar cases, i don't know if this is the proper way to fix this problem.

The way i fix Profiles is i start at km 1 and then compare the hights and if the difference gets bigger like 10HM or more i look for a km that would be a .5 km and change that km 1 higher or lower so its fits.

Your race now doesnt go below sealevel but km 85 in your profile loses 24Hm so would be a -2.4 so -2 fits pretty good.

The problem of your race starts much earlier. at km 19 For example you are 0.4HM different from real hight thats pretty accurate, on km 29 the difference is 20HM therefor you need to gain 2% somewhere in between. For example km 23 is +0.4 but rounded to a 0% km 24 is -0.7 rounded to a -1 in total you go down -0.3% but in your profile thats -1% there you could change km 23 to a 1% instead of 0% or km 24 to a 0% instead of -1%. another km you could fix a bit would be 27 for example here you go up 35m that would be 3.5% but its rounded to 3% you could round that to a 4% and gain another 10m to be more similar to the real hight after. Same for km 34 going up 15M but the 1.5% is rounded to 1% there you lose another 5m and these small differences everywhere add up over a longer stretch so from time to time you need to correct a km by hand, but as best a small change.

like a .4 instead of rounding down rounding up so the profile stays pretty real.

Hope this helps.

Greetings